Automatic Folder Gluer for 4 corner / 6 corner box with Crash bottom and Pre folding width 880mm

800C/1100C4&6 automatic folder gluer (4&6 corner)

I. Machine model:800/1100C4&6  fully-automatic folder gluer (4&6 corner)

Reminder:

See it much more clear by double click.

Power supply :  380V AC    50Hz

II. Features:

● The whole machine adopts the structure of laser-cut steel plates.

● Use German Contitech synchronous belts and wheels, correct running ratio, high speed, stable working, low noise and long service life.

● Modular structure and hommization design can enhance the installation and box change-over time.

● Inner couriers in the machine are adjusted by motors (position indicator is optional)

● Bearings are used in this machines: NSK, ASHAHI, HRB. Most of electrical components are Schneider brand.

Some advantages:

1. Belts are running in rail guide, will not go to sides.
2. Heavy-duty pneumatic longer conveyor, suitable for corrugated, and the whole conveyor can be moved left and right. The two sections of the conveyor can be moved front and back, up and down, more suitable for different corrugated boxes.
3. Equipped with jogger, avoiding fish-tail boxes.
4. The whole machine is of more compact structure, more beautiful figure.
5. Fastening devices for shafts are used to make the machine run more stable and longer service life.
6. The speed in pressing section is 30% faster than that in the main section, avoiding the boxes jammed onto the conveyor.

III. Main Technical Parameter:

Paper size: Max size for straight line bo:W×L: 800×700 mm          Min:90×60 mm

                       Max size for double-sided box:W×L: 700×800 mm      Min:90×60 mm

                       Max size for lock bottom box:W×L: 700×800 mm         Min:120×60 mm

                       Max size for 4-corner box::700 mm                            Min:150 mm

                       Max size for 6-corner box: 700 mm                               Min:250 mm 

Paper weight:  duplex box 180-800g/m²,  E.F.G (Corrugated)

Max  speed:       250m/min

Overall dimension:  13800×1700×1400mm  (L×W×H)

Weight:            4000Kg(around)

Power consumption:  17KW

IV．Basic configuration:

Feeder   

●RAPPLON feeding belts     10pcs  (specification:8×25×1110mm)

● Equipped with adjustable feeding knives:  2 pcs

● Equipped with vibrator motor : 1 set                

● Equipped with Japanese infinite speed regulator : 1 set        

  4&6Corner Section

● This section is installed in a stand, according to the folding size, set up and rotate the hook height. Japan Yaskawa servo system is used.

●Inner couriers are adjusted by motors (6 sets)

●NITTA belts: 12 pcs

specification:δ4*30*3490=3pcs  δ4*19*2930=3 pcs   δ4*30*3200=3 pcs  δ4*19*2930=3 pcs

Lower Gluer　

● Lower gluing tank both at left and right

● Multi-layer sealing anti-leaking device is used in shaft core.

● Stainless steel gluing wheel is used.

Folding section

● Special long folding section, boxes can be well folded and formed in this section.

● Inner couriers are adjusted by motors: 2 set

● Rail-guide for belts are used to avoid belts going to sides.

● NITTA folding belts  6 pcs

Specification:   δ4*19*1630=2 pcs   δ4*30*5300=2 pcs   δ4*30*4660=2 pcs

Pressing section

● Taiwan Fotek sensor and counter

● Pneumatic kicker for counting

● Nitta belts

Specification: δ4*19*2700=2 pcs   δ4*22*2765=2 pcs

Conveyor　　

● Long conveyor design

● Pneumatic control

● The upper section can be moved front and back.

● The two belts are in driving system, so they could be in more synchronous running.

● Belts specification:3*600*5893=1 pcs     3*600*8664=1 pcs

Electrical system:

                 ● Inverter and low-voltage electrical components: Schneider

                 ● Motor: Shanghai Dedong             

● PLC control system

                 ● Main motor: 7.5KW ,  motor in conveyor: 1.5KW , motors for adjusting the screw bars  : 60W and 90W

                 ●Independent electrical cabinet is used.

Main electrical components and brand

V．Packing:First packed by plastic bags, then by vacuum bags, at last installed onto the pallets

VI．Price:                  

VII．Guarantee:

           12 months from the date of machine received, but those consumption parts are not included. 

VIII．Others

      ● Electrical control diagrams and List of easily-damaged parts are attached.

        ● Air source should be supplied by user :40L,1.5KW